How to Supersede a Cleaved Restriction Light

Got a brake light that's not working? In less time than it takes to drive to the auto repair store, you can fix that low-cal yourself.

Introduction

Somewhen, all lite bulbs burn out, and this applies to exterior lights on your vehicle, too. Changing a faulty brake light is something anyone can larn to do. A replacement bulb costs about $ten, and replacing it on your ain volition save about $20 in labor and the fourth dimension it takes to travel to the shop and wait for the work to be done.

Tools Required

Materials Required

  • Brake lightbulb

Project stride-by-step (4)

Step 1

Place the Faulty Light

There are unremarkably several lightbulbs underneath each tail light lens, and one of these bulbs is the brake light.

  • Have someone sit in the vehicle, pressing and releasing the brake pedal several times while you stand behind the vehicle and cheque brake light operation.
  • Identify which bulb nether the taillight lens cover is the burned out brake light. There may be several bulbs under each lens, but only one is the brake lightbulb. Identifying where the brake lightbulb sits in under the lens may aid you subsequently when you're searching for the right replacement bulb.

Identify the Faulty Light

Step 2

Notice and Remove the Brake Lightbulb

Most modern vehicles allow admission to all tail light bulbs from within the trunk.

  • Open the trunk and expect directly behind the tail light lens with the malfunctioning bulb. You'll see the wires and a plastic base where each tail light bulb is located.
  • Use your head lamp or flashlight to decide which bulb in the housing is the brake lite.
  • Plough the brake light holder counterclockwise to release information technology, so pull the bulb holder and seedling into the trunk.
  • Remove the bulb from the holder.

Find and Remove the Brake Lightbulb

Step 3

Acquire New Restriction Lightbulb

Y'all don't necessarily need to bring the burned out restriction lightbulb with yous when y'all shop, but having information technology in manus helps you make sure you're getting the correct replacement bulb.

  • Visit an online supplier and search for the correct brake lightbulb for your brand and model of vehicle. Amazon offers a broad multifariousness of automotive bulbs and the opportunity to input your vehicle details to verify that the bulb will fit.
  • Alternatively, visit an auto parts supplier with your one-time bulb in hand.
  • Consider ownership two bulbs and continue a spare in your glove compartment. If one brake light has burned out, the other will probably go soon.

Acquire New Brake Lightbulb

Pace 4

Install and Test the New Bulb

  • Insert the new bulb into the holder.
  • Push the holder and bulb into the tail light assembly and rotate the holder clockwise to lock information technology in place.
  • Check that the bulb and holder are solidly engaged in the tail light assembly.
  • Accept someone sit in the driver's seat and piece of work the brake pedal while you bank check light performance from behind.

Install and Test the New Bulb

Originally Published: August 25, 2020